23
LIGHT / SNOOZE
button or waiting for the 30-second time-out to
take effect.
6.3 Setting mode
Press and hold the
SET
button for two seconds to enter the
SET
Mode. To
proceed to the next setting, press (do not hold) the
SET
button.
To exit the
SET
mode at any time, press the
LIGHT / SNOOZE
button.
Table 5 summarizes the set mode sequence and commands.
Command Mode
Settings
Image
[SET]
+ 2
seconds
Enter Set
Mode, Beep
On or Off
Press [WIND +] to switch
OFF and ON.
This will prevent the beep
from sounding when
pressing any button.
[SET]
Clear
Max/Min
Press [WIND +] to switch
OFF and ON.
When set to ON, the
minimum and maximum
values reset every day at
midnight (00:00).
When set to OFF, the
minimum and maximum
values must be reset
manually.
[SET]
12 hour / 24
Hour Format
Press [WIND +] to switch
hour format between 12
hour and 24 hour format.
[SET]
Hour
Press [WIND +] or
[PRESSURE -] to
adjust hour up or down.
[SET]
Minute
Press [WIND +] or
[PRESSURE -] to
