Press “
” to confirm your setting,
switch to the hour setting. Now use
“
▲
” and
“▼”
buttons to set the
correct hour.
Press “
” to confirm your setting,
switch to the minute setting. Now use
“
▲
” and “▼”
buttons to set the
correct minute.
Press “
” button to confirm your setting,
switch to the year setting. Now use
“
▲
” and “▼”
buttons to set
the correct year.
Press “
” button to confirm your setting,
switch to the month setting. Now use
“
▲
” and “▼”
buttons to
set the correct month.
Press “
” button
to confirm your setting, switch to the date setting. Now use
“
▲
” and “▼”
buttons to set
the correct date.
Press “
” button
to confirm your setting, switch to
barometric pressure calibration mode
. Now use
“
▲
” and “▼”
buttons to set the atmospheric pressure value.
Press “
” button
to confirm your setting, switch to setting the initial
weather. Now use “
▲
” and “▼”
buttons to to select the current weather
Press“
” to confirm your setting and to end the setting p
rocedures, enter the clock mode
During the time setting process, double-
click the “
” touch area to exit the setting mode di
rectly.
F.Y.I.:
After 20 seconds without pressing any button, the clock switches automatically from Set Mode to Normal Time
Mode.
In the set time, the number of minutes of the change, automatically from the zero second forward
In the set time, you can press hold the
“▲”
and
“▼” button to quickly change the setting of the value
Exceeding the British signal tower diameter of 1000KM or more, the signal received by the radio clock signal is
very poor. It is recommended to set the RCC to OFF.
The forecast of the weather station is based on the analysis of changes in air pressure. The atmospheric
pressure is provided by the factory and has been adjusted to absolute pressure. Since air pressure usually
decreases as altitude increases, public meteorological agencies always publish so-called relative air pressure.
In order to obtain a comparable value, the relative air pressure has been adjusted to the topography of the
country. You can adjust the air pressure of the weather station to the ratio of its location. For this, you must
uniquely adjust the current air pressure of the weather station. Ask your local weather forecast service about
the air pressure at sea level, or get the current value from the Internet. The above adjustment of the air
pressure setting is based on this reason. When the air pressure is absolute air pressure, ABS PRESSURE is
displayed, and when the air pressure is adjusted, it displays REL PRESSURE.
If the daylight saving time system is not implemented in this area, please select ON or OFF according to
whether the city in your area adopts daylight saving time, and the time of sunrise and sunset will also be
determined according to daylight saving time
Setting the daily alarms:
Press and hold down“
” button more than
2 seconds to enter the alarm setting mode, first enter the alarm 1
8
