Youshiko YC9333, Quick Start Manual

Page: 7 / 13

 Radio recep ti on is weaker in rooms with concrete walls (e.g.: in cellars) and in o ffi ces.
In such extreme circumstances, place the system close to the window.

During the RC receive mode, only the
【
Light/SNZ
】
and
【
-
】
bu tt ons have a
func ti on, other bu tt ons are not func ti onal, If you want to carry out other func ti ons of
opera ti on, please press
【
-
】
bu tt on to exit the RC receiving mode.
Manual ti me se tti ng:

Press and hold the
【
SET
】
bu tt on for 2 seconds, the “
ON/OFF ”
starts to fl ash.
Now use
【
+
】
and
【
-
】
bu tt ons to set the radio control func ti on ON or OFF.
 Press
【
SET
】
bu tt on to con fi rm your se tti ng, the 12/24HR start to fl ash. Now use
【
+
】
and
【
-
】
bu tt ons to set the 12/24 hour mode you need.

Press “ SET” to con fi rm your se tti ng, the Hour starts to fl ash. Now use “ + ” and “ - ”
bu tt ons to set the correct hour.

Press “ SET” to con fi rm your se tti ng, the Minute starts to fl ash. Now use “ + ” and “ - ”
bu tt ons to set the correct minute.

Press “ SET” to con fi rm your se tti ng, the Month and Date icon starts to fl ash. Now use
“ + ” and “ - ” bu tt ons to select date display on Month/Date or Date/Month.

Press “ SET” to con fi rm your se tti ng, the “year” is display and starts to fl ash. Now use
“ + ” and “ - ” bu tt ons to set the correct year.

Press “ SET” bu tt on to con fi rm your se tti ng, the “month” starts to fl ash. Now use “ + ”
and “ - ” bu tt ons to set the correct month.

Press “ SET” bu tt on to con fi rm your se tti ng, the “date” starts to fl ash. Now use “ + ”
and “ - ” bu tt ons to set the correct date.

Press “ SET” bu tt on to con fi rm your se tti ng, the weather forecast pa tt ern starts to
fl ash. Now use “ + ” and “ - ” bu tt ons to select the current weather pa tt ern.

Press “ SET” bu tt on to con fi rm your se tti ng, the air pressure unit will display and
starts to fl ash. Now use “ + ” and “ - ” bu tt ons to choose the air pressure unit you need.

Press “ SET” bu tt on to con fi rm your se tti ng, the air pressure value will display and
starts to fl ash. Now use “ + ” and “ - ” bu tt ons set to l ocal standard pressure value.

Press “ SET” bu tt on to con fi rm your se tti ng and to end the se tti ng procedures, then it
will return to the normal mode.
F.Y.I.:

If there is no valid opera ti on within 20 seconds, it will automa ti cally return to normal
ti me mode from the set mode.