Ini
ti
al opera
ti
on:
Open the Weather Sta
ti
on ba
tt
ery compartment cover
Insert 2 x AA ba
tt
eries observing polarity [ “+” and “ –“ marks]
When you insert the ba
tt
eries, all icons on the LCD will light up for 3 seconds, and
you will hear a beep tone, and then detect indoor temperature & humidity.
The Weather Sta
ti
on will now start to make a connec
ti
on to the outdoor remote
sensor. This process lasts for a maximum of 3 minutes and will display by a
fl
ashing
recep
ti
on antenna symbol
in the “OUTDOOR” display area on the receiver.
then open the remote Sensor no: 1 , ba
tt
ery compartment cover,
push the channel
switch to the “1” posi
ti
on, Insert 2 x AA ba
tt
eries observing polarity [“+” and “–”
marks], close the ba
tt
ery cover.
According to the same method, push the channel switch to the “2” or “3” in sensor
no: 2 and 3 and insert ba
tt
eries in sensors.
A
ft
er this all sensors will connect to display unit and it will enter the Radio control
receive mode.
Recep
ti
on of the Radio signal:
The clock will automa
ti
cally search the
MSF
signal a
ft
er 3 minutes of any restart or
changing of new fresh ba
tt
eries. The radio mast icon starts to
fl
ash.
At 1:00 /2:00 / 3:00 AM, the clock automa
ti
cally carries out the synchroniza
ti
on
procedure with the
MSF
signal to correct any devia
ti
ons to the exact
ti
me. If this
synchroniza
ti
on a
tt
empt is unsuccessful (the radio mast icon disappears from the
display), the system will automa
ti
cally a
tt
empt synchroniza
ti
on at the next full one hour.
This procedure is repeated automa
ti
cally up to total 5
ti
mes.
To start manual
MSF
signal recep
ti
on, press and hold the “
-
” bu
tt
on for 3 seconds. If
no signals received within 7 minutes, then the
MSF
signal search stops (the radio mast
icon disappears) and start again at the next full one hour.
During RC recep
ti
on
，
to stop searching radio signal, press the “
-
” bu
tt
on once.
F.Y.I.:
A
fl
ashing radio mast icon indicates that the
MSF
signal recep
ti
on has started
A con
ti
nuously displayed radio mast icon indicates that the
MSF
signal was received
successfully
We recommend the product be placed at a minimum distance of 2.5 meters (8.2Feet)
to all sources of interference, such as televisions or computer monitors
or switching
power adapter.
