youngmangroup.com
Step 1: To Install the Loft Ladder
1.15.
On the side you are adjusting
first (left shown here), depress the red
button on the top rung to disengage the
locking bolt from the top stile.
1.16.
Keep the button pressed and
rotate the stile until the required
extension position is reached and then
release the button, see Figs 1.17 and
1.18a and 1.18b.
1.17.
The set extension is indicated by
the orientation of the grooves on the
end cap, see Fig 1.16 and Fig 1.17.
In Fig 1.17, the setting shows ‘no
extension’.
1.18a.
Shows the end cap rotated
90 degrees clockwise to the 15 cm
extension position.
1.18b.
Shows the end cap rotated
180 degrees clockwise to the 30 cm
extension position.
1.18c and d.
Now carefully pull the
stile upwards until the stile is locked in
its extended position.
Repeat the same setting on the
right-hand top stile from step 1.15.
Note that this stile must be rotated
90 degrees and 180 degrees CCW for
15 and 30 cm extensions respectively.
0
0
15
15
30
30
View from
above top rung
Front of ladder
Left stile
clockwise
Right stile
anti-clockwise
0
0
15
15
30
30
Left stile
90∞ clockwise
Right stile
anti-clockwise
0
0
15
15
30
30
Left stile
180∞ clockwise
Right stile
anti-clockwise
Top rung
1.15
1.16
1.17
0
0
15
15
30
30
View from
above top rung
Front of ladder
Left stile
clockwise
Right stile
anti-clockwise
0
0
15
15
30
30
Left stile
90∞ clockwise
Right stile
anti-clockwise
0
0
15
15
30
30
Left stile
180∞ clockwise
Right stile
anti-clockwise
Top rung
0
0
15
15
30
30
View from
above top rung
Front of ladder
Left stile
clockwise
Right stile
anti-clockwise
0
0
15
15
30
30
Left stile
90∞ clockwise
Right stile
anti-clockwise
0
0
15
15
30
30
Left stile
180∞ clockwise
Right stile
anti-clockwise
Top rung
b
d
a
c
1.18
Hold in the Button
11