youngmangroup.com
Step 1: To Install the Loft Ladder
Extend the Ladder
1.19.
Fully extend the ladder until all
rungs are locked. This is indicated in the
illustration below by the red buttons
being extended.
Important
Ensure that all the red buttons on the
underside of the rungs are in the locked
position, see above right.
It is
dangerous
to climb or attempt to
climb the ladder when the rungs are not
locked, see right.
1.20.
Stand the ladder on the floor
below the loft and rest the ladder
against the sub-frame with the top of
the ladder close to the swivel arms.
Climb the ladder and enter the loft to
gain access the top of the ladder.
Screw to the Swivel Arms
1.21a.
Align the holes in the swivel arm
with the threaded hole in the top end of
the ladder.
1.21b.
Finger tighten the bolt supplied.
1.21c.
Use an Allen key to tighten this
bolt to securely fix the swivel arm to the
ladder ensuring the location pin
engages with the groove in the endcap.
Repeat for the other side of the ladder.
1.21d.
Shows both sides of the ladder
fastened to the swivel arms.
Installation is now complete.
1.19
1.19
1.20
b
d
a
c
1.21
Rung Locked
Rung Not Locked
Location
Pin
12
