66
-
Regularly inspect all pre-attached and optional component hardware to ensure tight and secure
attachment, and good working condition.
Tire Pressure & Inspection
-
See the side wall of bike tires for proper size for bike. These tires use a rubber inner tube to
retain air pressure. The tires are designed for typical terrain and surfaces bike was intended to be
used on. Only replace tires with a similar tire design of same size.
-
Always check all items related to Tires and Wheels listed in Pre-Ride Check before each ride.
-
Properly inflated tires will help to ensure best bike performance, longest range possible and
maximum life of tires. Keep tires inflated to o 5-30 P.S.I.at all times. Never exceed maximum
pressure listed on tire side wall.
-
Tires will lose air pressure over time. Always check tire pressure before operating the bike. Low
tire pressure can result in damage to wheels that will be more difficult and expensive to repair.
-
Always replace tires with equivalent tires with reflective side walls. Bike is equipped from factory
with this type of tire to provide most visibility in low light conditions. Keep tires clean to ensure
reflective side wall can function properly.
-
Remove the valve cap and add air.
If you do not have the experience, skill, and tools to complete maintenance and adjustment
of your bike, Young Electric bikes strongly recommends having a certified, reputable bike
mechanic maintain, tune, and ensure the bike is safe to ride.
CAUTION
Summary of Contents for E-Explorer Cruiser
Page 72: ...72 SERVICE PARTS...
