58
BIKE ADJUSTMENTS
Seat Position and Angle
-
Loosen the seat adjustment bolt on the clamp located under the seat, using an Allen wrench.
-
Tilt the seat to adjust the angle. Do not exceed the limit markings on the seat rail.
-
Using an Allen wrench, tighten the bolt securely while holding the seat in the desired position.
Seat Height
Sit on seat with ball of foot on pedal and pedal rotated to the lowest point. Position seat so that knee
is slightly bent.
Depending on user’s preference, lowering the seat so the user can put one or both
feet on the ground without dismounting from the seat may offer a safer and more comfortable
experience. To adjust the height of the seat:
-
Swing the quick release lever to the open position.
-
Move seat up or down, set desired height.
-
Tighten the adjustment nut on the seat post properly.
-
Swing the quick release lever to the closed position.
-
Check to make sure the seat is secure by twisting it back an forth. Tighten until secure.
⚠
WARNING
Do not attempt to adjust or service your bike if you are not confident in your ability to do
so. Adjustments and service performed improperly may result in damage to bike, void
warranty, or accident resulting in serious personal injury or death.
Summary of Contents for E-Explorer Cruiser
Page 72: ...72 SERVICE PARTS...
