6.
Maintenance on the control system
6.1.
Replace the remote control (Shark, VR2 and R-Net)
The driving program of the Shark, VR2 and R-Net controller systems is stored in the power
module. Replacing the remote control can therefore be done without any programming.
1.
Replace the remote control.
6.2.
Replace the power module (Shark, VR2 and R-Net)
The driving program of the Shark, VR2 and R-Net controller systems is stored in the power
module.
1.
Make a backup of the driving program from the power module.
Use a laptop and programming software for this step.
2.
Replace the power module.
3.
Load the backup of the driving program in to the new power module.
4.
Check all functionality of the wheelchair.
Maintenance on the control system
22
Service manual - Liam
