6.
Disconnect the motor cable (A) from the
interconnection of the power module.
A
WARNING!
After repairing, reprogramming or replacing parts, always check the
functionality of the entire wheelchair. Pay special attention to safety features
such as slowdown driving or drive inhibits when seat lift and tilt are both used.
5.2.
Carrier
5.2.1.
Disassemble a motor arm
Preparation
See section
5.1.
Procedure
1.
Lift the wheelchair until the wheels are free
from the floor.
•
Use a lifting platform.
2.
Remove the locking ring (A) from the rubber
suspension to lower the motor arm.
3.
Remove screw B and completely remove
the motor arm (C)
4.
If necessary the distance holder (D) can be
removed.
5.
Take the motor cable out of the carrier.
D
B
A
C
A number of parts are now accessible for repairs. See the applicable procedure for further
instructions.
Maintenance tasks & adjustments
Service manual - Liam
15
