Flip LCD
AM/FM
FM
AM
EMG
The MJ50 has 5 band (A,B,C,D,E).
Press EMG button and change 5 band.
* Press hold the SCAN button to start scanning.
* Display and the unit will start scanning.
ASQ
F (FUN)
The seven options are white,red,yellow,purple,cyan,blue and green.
You can flip the display for a convenient mounting position.
You can select AM or FM modulation by press hold the AM/FM button.
This function changed from EMG to Band selector.
Scan
Your CB-350 incorporates a scanning feature. The MJ50 will scan through all 40
channels and will stop at any BUSY channel. It will stay on that channel until
seven seconds after conversation has stopped and then it will resume scanning.
* To start scanning turn on the power first and adjust the volume and squelch.
* If you want stop scanning you can push hold Scan button again or press
the Push to talk switch.
This will shut off the scanning function and transmit on that channel.
The ASQ is a feature that allows the radio to keep the receiving mode without
white noise and to receive the incoming signal stronger than fixed level.
It is level located 3dB below maximum usable sensitivity.
Normal squelch control system was RF level controlled but the ASQ controlled
system is with noise filter amplifier.
Operations
So more actually controlled of squelch system in the many unless noise condition.
* Press hold ASQ button on the microphone.
* The word circule dot will appear in the LCD.
* If you want disable ASQ you can push hold ASQ button again.
This F button can control two SUB function is sequence.
