1) DX/LOCAL
Press F key
Factory Reset
1. General
Transmitter
DC 13.8V
-10 ℃ ∼ +50 ℃
Channel step
10KHz
The DX feautre allows long distance communication for some season.
The DX setting condition is maximum user receiving sensitivty condition.
When DX is not selected, you can communicate with local area.
*Press F button on the microphone and the word "Fun" will appear in the LCD.
* To change press menu button on the front panel.
* The word change from "d" to "L". It is local mode set.
* If you want change from local to DX. Again press F + MENU button.
Change to Local
2) Change of Poland freuqnecy
The -5KHz feature allows the user to Poland freuqnecy.
Pree F on the microphone and EMG button and will be change of display as below.
The -5KHz a few second appear. It is poland frequency fixed.
The 1 channel normal frequency is 26.965MHz but poland frequency is 26.960MHz.
Set to 1 channel 26.965MHz
Set to 1 channel 26.960MHz
Turn Radio off press and hold both MENU and EMG buttons then turn
radio on, this will reset all menu settings to defaults as listed on menu page.
Technical Specifications
Crystal controlled PLL Synthesizer
Receiver
Double conversion, Super heterodyne system
Operating voltage
Operating Temperature
Dimension
83(D) x 99(W) x 24(H) mm.
