1
YSM
YSM5-2, YSM6-2 and YSM8-2
Powered Studio Monitors
Congratulations on your purchase of
the next generation of Yorkville Sound
Powered Studio Monitors. Building
upon our technical knowledge and
experience, we have developed the
best sounding monitors in their class.
The YSM-2 Series monitors are at
home in professional recording studios,
home studios and living rooms. We’re
confident that the YSM5-2, YSM6-2
or YSM8-2 will deliver uncompromising
clarity which your mixes demand.
The YSM5-2, YSM6-2 and YSM8-2 feature 1-inch black-silk dia
-
phragm neodymium dome tweeters. These tweeters blend seamlessly
into the specially designed waveguide which is integrated into the front
baffle. The waveguide edges perfectly couple the tweeter with the
woofer, reducing sonic anomalies normally created by their proximity.
The fiber reinforced composite cone woofers have also been designed
to perform with sonic excellence, providing a wide dynamic range at
all levels. Transparent signal processing and bi-amplification has been
optimized for each driver. The woofer and Tweeter have been perfectly
time aligned to eliminate any phase irregularities usually associated with
2-way designs.
1. Mains Voltage, Cord and Fuse Replacement
The YSM-2 Series universal supply will accept any voltage between
100VAC and 240VAC (50-60Hz).
NOTE: If the fuse needs replacing, disconnect the power cord from the back of the unit; using a
small flat head screw driver, pry out the plastic fuse holder located just below the power recep-
tacle. Refer to replacement values printed at the back of the unit, near the Serial Number.
If the unit does not power up, check...
i. Power cord is connected.
ii. Power source is turned on.
iii. Fuse is blown, if replaced and it still
blows then there is permanent fault
inside the unit and should be returned
to a Yorkville dealer.
2. Input Section
The YSM-2 Series utilizes balanced XLR
and 1/4-inch TRS inputs, and an unbalanced
RCA input. If you need to use an 1/8-inch
input, a Yorkville A210MRY 1/8-inch to RCA
cable can be used.
Volume
XLR
Max
Min
TRS
Balanced
RCA
Unbalanced
