![background image](http://html.mh-extra.com/html/york/yohc-12/yohc-12_service-manual_947463065.webp)
9.4 Troubles and solutions concerning the remote controller
Please make the following check before asking for repair or maintenance.
Trouble Cause
Solutions
Check if the mode display on the
LCD is AUTO
The lndoor Unit will select fan speed
automatically when AUTO mode is
selected.
CAN NOT CHANGE
THE FAN SPEED
SETTING
Check if the mode display on the
LCD is DRY
The lndoor Unit will select fan speed
automatically when the unit is on
DRY mode.
The transmission symbol does not flash
Symptom Checking
items Cause
Press ON/OFF button, the
remote controlling signals can
not be transmitted
Check if the remote controller
has run out of power
When the battery was out,
transmission signals can not be
sent
Temperature display disappear
Symptom Checking
items
Cause
Temperature Display does
not light.
Check if the mode display on
the LCD is FAN ONLY
You can not set the temperature
when the unit is on FAN ONLY
mode.
The Display Goes Off
Symptom Checking
items
Cause
The indication on the
display disappears after a
lapse of time.
Check whether the timer
operation has come to an end
when the OFF TIMER is
indicated on the display.
The air conditioner operation stops
since the set time elapsed.
The ON TIMER indicators
go off after a lapse of certain
time.
Check whether the timer
operation is started when the
ON TIMER is indicated on the
display.
When the time set to start the air
conditioner is reached, the air
conditioner will automatically start
and the appropriate indicator will go
off.
The Signal Receiving Tone does Not Sound
Symptom Checking
items
Cause
No receiving tone
sounds from the indoor
unit even when the
ON/OFF button is
pushed.
Check whether the signal
transmitter of the remote controller
is properly directed to the receiver
of the indoor unit when the
ON/OFF button is pushed.
Direct the signal transmitter of the
remote controller to the receiver of
the indoor unit, and then repeatly
push the ON/OFF button twice.
Buttons on the remote
controller don't work.
Press Reset button.
Summary of Contents for YOHC 12
