428546-YIM-C-1110
YCCS System Manager and Zone Coordinator Installation Instructions
1
Applications
The York Commercial Comfort System (YCCS) System
Manager and Zone Coordinator supervisory controllers
bring an entirely new generation of Building
Automation System (BAS) technology to light
commercial systems. These supervisory controllers
use Internet Technology (IT) and BACnet®
Master-Slave/Token-Passing (MS/TP) communication
to provide supervisory level control of light commercial
BASs.
All System Manager models and select Zone
Coordinator models feature an intuitive color
touch-screen User Interface (UI) that provides the
ability to schedule, trend, and adjust parameters for the
entire building. The supervisory controllers require no
programming and have predefined point lists for the
mechanical equipment configuration used within the
facility. Both devices support remote access via a
standard Web browser or any computer connected to
the building network.
North American Emissions Compliance
United States
Canada
Installation
Follow these guidelines when installing the System
Manager or Zone Coordinator:
•
Transport the System Manager or Zone
Coordinator in the original container to minimize
vibration and shock damage.
•
Do not drop the controller or subject it to shock.
•
Do not open the controller housing. The controllers
have no user-serviceable parts inside the housing.
Parts Included
One System Manager or Zone Coordinator with
removable mounting base.
Materials and Special Tools Needed
•
three fasteners appropriate for the mounting
surface (M4 screws - #8 screws)
•
wire strippers
•
small flat-head screwdriver
•
22 AWG (0.65 mm) 3-conductor, twisted, shielded
cable with a drain wire
Note:
This drain wire is used only to group the
shielded cable. Do not use this drain wire as a
connection to the board.
•
wire nuts for 22 AWG drain wire
•
electrical tape
This equipment has been tested and found to
comply with the limits for a Class A digital device
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference when this equipment is
operated in a commercial environment. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is
likely to cause harmful interference, in which case
the user will be required to correct the interference
at his/her own expense.
This Class (A) digital apparatus meets all the
requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numérique de la Classe (A) respecte
toutes les exigences du Règlement sur le matériel
brouilleur du Canada.
YCCS System Manager and Zone Coordinator
Installation Instructions
YK-SMU2x0-0, YK-ZCUxx0-0
