background image

1

Contents

NOTE:

This

 

air

 

conditioner

 

has

 

been

 

designed

 

for the

 

following

 

temperatures

Operate

 

this air

 

conditioner

 

within

 

this

 

range

.

18K~55K

Series

Mode

Outdoor operating temperature tange

Maximum

(℃)

Minimum

℃)

Heat Pump Type

Cooling Operation

43

-15

Heating Operation

24

-10

Cooling Only Type Cooling Operation

43

-15

 ● 

Storage condition: Temperature -25~60

                     

Humidity      30%~80%

 ● 

Heating and electric heating function are not available for cooling only models.

                          

: The symbol refers to a hazard which can result in severe personal injury or death.
: The symbol refers to a hazard or an unsafe practice which may result in severe personal injury 

or death. 

 

: The symbol refers to a hazard or an unsafe practice which may result in personal injury, 

  

product or property damage. 

 

: It refers to the remarks and instruction to the operation, maintenance, and service.

DANGER

WARNING

CAUTION

NOTE

Alert Symbols

AUV-18HR4SSA1
AUV-24HR4SFA1
AUV-36HR6SDB1
AUV-48HR6SEC1
AUV-60HR6SPC1

RPFC-2.0UNZ1NH
RPFC-3.0UNZ1NH
RPFC-4.0UNZ1NH
RPFC-6.0UNZ1NH
RPFC-6.5UNZ1NH

YFGN18BZNRZUH1
YFGN24BZNRZUH1
YFGN36BZMRZUH1
YFGN48BZMRZUH1
YFGN55BZMRZUH1

RAS-2.0UNZGNH1
RAS-3.0UNZGNH1
RAS-4.0UNZGMH1
RAS-6.0UNZGMH1
RAS-6.5UNZGMH1

Blowing out the surviwal heating air

When

 

stoping

 

the

 

air

 

conditioner

 

in

 

normal

 

operation

the

 

fan

 

motor

 

would

 

run

 

with

 

low

 

speed

 

for

 

a

 

while

 

to

 

blow

     

out

 

the

 

residual

 

heating

 

air

.

Summary of Contents for YFGN24BZNRZUH1

























Reviews: