Risk of electric shock
Unit is remotely controlled and
may start without warning
1
. Isolate all sources of electrical supply to the unit including any control system supplies switched by the unit. Ensure that all points of electrical and gas
isolation are secured in the OFF position. The supply cables and gas pipework may then be disconnected and removed. For points of connection refer to
unit installation instructions.
2
. Remove all refrigerant from each system of the unit into a suitable container using a refrigerant reclaim or recovery unit. Thi s refrigerant may then be reused, if
appropriate, or returned to the manufacturer for disposal.
Under No circumstances should refrigerant be vented to atmosphere.
Where appropriate, drain
the refrigerant oil from each system into a suitable container and dispose of according to local laws and regulations governing disposal of oily wastes.
3
. Packaged unit can generally be removed in one piece after disconnection as above. Any
? xing down bolts should be removed and then unit lifted from
position using the points provided and equipment of adequate lifting capacity. Reference MUST be made to the unit installation instructions for unit weight
and correct methods of lifting. Note that any residual or spilt refrigerant oil should be mopped up and disposed of as described above.
4
. After removal from position the unit parts may be disposed of according to local laws and regulations.
INSTALLATION, REMOVAL AND DISPOSAL
Read the Manual
This product contains refrigerant under pressure, rotating parts, and electrical connections which may be a danger and cause in jury!
All work must only be carried out by competent persons using suitable protective clothing and safety precautions.
J440-EN.indd 27
2/14/08 1:27:05 PM
