9
%.',)3(
EN
■
Piping
The auxiliary piping can be connected in the diections
shown the above diagram. To connect in the
"
,
#
and
$
direction, pipes will need to be extended.
• Bend pipes carefully to avoid flattening or obstructing
them if the pipes are bent incorrectly, the indoor unit
may be unstable on the wall.
• Carefully arrange pipes so that pipes do not stick out
of the rear plate of the indoor unit.
Right
Right
Right
Right
Left
Rear Bottom
■
Drain hose
• Drain hose is flexible and can be routed to suit various
piping arrangements. The drain line must include elbow
trap (U bend). Connect a plastic condensate pipe with
an internal diameter of 12 mm.
• The drain hose can be connected to the left or the
right side.
Verification of condensate water drainage:
Fill the drain pan with water and observe evacuation.
.OTE$ONOTPUTTHEDRAINHOSEENDINTOWATER
Drain hose
For left and left rear piping
Drain cap
Drain cap
For right and right rear piping
CAUTIONS
Drain hose
• Never modify the unit by removing any of the safety guards
or by passing any of the safety interlock swithces.
• Connect the interconnecting cable correctly and connect
the connecting cable to terminal as identified with their
respective marking.
• Do not damage the conductor core or inner insulation of
power supply cables and do not deform or crush the cables.
CAUTIONS
