OPERATION
1. TRANSMISSION
SOURCE
- Before starting the operation from the handset, keep the handset’s transmission
source at line of sight with the signal receiver
2. ON/OF
- Each press off this button will turn ON or OFF the unit.
- On every press, ON/OFF status will be indicated by the displays at the receiver
side.
3. MODE
- Pressing the MODE button will select the Cool Mode operation, Fan Mode
operation and the Heat mode operation.
- Sequence will be as follows:
COOL
FAN
HEAT
- Selected mode will be indicated at the receiver.
NOTE :
In cool only unit, heat mode selection will not be available.
4. FAN
- Pressing this button will advance the fan speed in the following sequence:
LOW
MEDIUM
HIGH
AUTO
- Under FAN mode, only LOW MEDIUM HIGH sequence will be available.
5. TIMER
- TIMER function is to turn the unit ON or OFF automatically after a certain
number of hours.
- Pressing TIMER button once will show the time left for the unit to turn ON or
OFF.
- Subsequent pressing of TIMER button will increase the timer setting in 1 hour
step from 1 to 15 hours.
- If TIMER key is not pressed for 5s continuously, the display return to tempera-
ture display.
NOTE : TIMER set range will vary for model to model
6. SLEEP
- Pressing the SLEEP button will ON or OFF the energy saving SLEEP function.
- SLEEP function is not available in FAN mode.
- In cool or heat mode, SLEEP function will automatically adjust the set tempera-
ture to provide comfortable sleeping condition.
7. SWING
(OPTIONAL)
- Pressing the SWING button will activate or deactivate the air swing operation.
8,9 TEMPERATURE SETTING
- and buttons are used to set the temperature .
- Press button to increase the set temperature by 1°C.
- Press button to decrease the set temperature by 1°C.
- Set temperature available from 16°C to 30°C.
- Temperature setting will be disabled in FAN mode.
NOTE : For some models, during TIMER setting mode, these same buttons will
be used to set the timer also.
13
