background image

www.yorkfitness.com

www.yorkfitness.com

3

Please read this instruction manual before you begin 

assembly. Great care has been taken to design these 

instructions and following them will help you with 

quicker assembly and minimize the risk of injury.
It is important that you keep these instructions for 

future reference.
This list is not exhaustive - You are responsible for 

your own safety!
•  Always assemble and operate the equipment on a 

level surface.

•  Ensure the equipment is stable before use.
•  Always ensure that the equipment has adequate 

space around it.

•  The safety level of this equipment can only be 

maintained if it is regularly examined for wear and 

tear.

•  Replace defective components immediately and 

keep the equipment out of use until it is repaired.

•  Use only the adjustment setting as described in 

the instructions. Always use the correct adjustment 

pin / fixing.

•  Always check that any pins / fixings are tight and 

secure before use and after adjustment.

•  Never leave any adjustment devices projecting 

from the equipment.

•  Never overload the equipment. (See maximum 

user weight)

•  Never use the equipment in any other manner 

other than the ways explained in these 

instructions.

•  Injuries to health may result from incorrect or 

excessive training.

•  If children are allowed to use the equipment, their 

mental and physical development and above all 

their temperament should be taken into account. 

They should be controlled and instructed in the 

correct use of the equipment.

•  This appliance is not intended for use by persons 

(including children) with reduced physical, sensory 

or mental capabilities, or lack of experience 

and knowledge, unless they have been given 

supervision or instruction concerning use of the 

appliance by a person responsible for their safety.

•  This product is not suitable for therapeutic 

purposes. 

•  Due to our continuous policy of product 

development, York Barbell reserves the right to 

change specifications without notice.

•  This product is has been tested for Commercial 

Use and is guaranteed for this environment. Please 

check full details under guarantee.

CAUTION! The instructions must be followed carefully 

in the assembly, use and maintenance of your 

equipment.  The guarantee does not cover damage 

due to negligence of the assembly, adjustment and 

maintenance instructions described herein.

Maximum user weight: 130kg

Safety Information

Summary of Contents for SB9000













Reviews: