background image

YORK Predator X-Trainer  | INSTRUCTION MANUAL     •  27

WARRANTY

This product is supplied with a standard warranty as follows:

L

• 

ifetime frame

1

• 

2 months other parts

1

• 

2 months labour

This product is warranted for use in a home, personal, family or household environment
Please Note: Warranty details may vary from one market area to another

Warranty Terms

York Fitness warrants that the Product you have purchased from an authorized York Fitness reseller is free from defects in 

materials and workmanship.  The Warranty is valid subject to normal and reasonable use in the environment as described 

above, and correct assembly of the product during the warranty period.  The warranty period extends to the original 

purchaser only.  It is not transferable to anyone who subsequently purchases the Product from you.
The warranty excludes normal wear and tear on parts.
Your sales receipt, showing the date of purchase of the product, is your proof of the date of purchase.
This warranty becomes valid only if the Product is assembled / installed according to the instructions / directions included 

with the product.  This warranty does not extend to any product that has been damaged or rendered defective: (a) as a result 

of accident, misuse, abuse or lack of reasonable care; (b) by the use of parts not manufactured by York Fitness or sold by York 

Fitness; (c) by modification of the product; (d) as a result of service by anyone else other than York Fitness or an authorized 

York Fitness warranty service provider.
During the warranty period, York Fitness will at no additional charge provide replacement part(s) or repair the product (at 

York Fitness’s option) if it becomes defective, malfunctions or otherwise fails to conform with this warranty under normal, 

non-commercial, personal, family or household use.  In repairing the product, York Fitness may replace defective parts or at 

the option of York Fitness, use serviceable used parts that are equivalent to new parts in performance.  All exchanged parts 

and products replaced under this warranty will become the property of York Fitness.  York Fitness reserves the right to change 

manufacturers of any part to cover any existing warranty. 
If the product must be returned, you must return the Product or defective part to York Fitness in its original container (or 

equivalent) with Proof of Purchase.  Any evidence of alteration, erasing or forgery of proof of purchase documents will be 

cause to void this warranty.  You must prepay any shipping charges and you are responsible for insuring any product or part 

that is returned.  Should any product submitted for warranty service be found to be ineligible, an estimate of repair cost will 

be furnished and the repair will be made if requested, upon York Fitness’s receipt of payment or acceptable arrangement 

of payment.  Under no circumstances will returns be accepted without return authorization by our Customer Service 

department.
To obtain warranty service you must provide the following information: 
Name of Product, Product Code, Batch No, Date Purchased, and Nature of fault or part number required.
Neither dealer of this product nor any retail establishment selling this product has any authority to make any warranties or to 

promise remedies in addition to, or inconsistent with, those stated above. This warranty does not affect your statutory rights.
Please note that warranty terms may vary from one market area to another.

Summary of Contents for MegaGym 52023



































Reviews: