YORK MINISPLIT FLOOR/CEILING Code 035T80012-000
14
FLOOR/CEILING
■
Indoor Unit Fixing
Ceiling Case
1
Lift the indoor unit to the bracket.
2
Push the indoor unit to lock at the bracket.
Floor Case
1
Tighten the bolt to lock indoor unit to
bracket floor case.
2
Lift the indoor unit, and hang it to the wall
bracket.
3
Make sure that the unit is correctly hung in
place by sliding it to the left and the to the
right.
■
Drain Hose
Drain hose can pass through the indoor unit
follow figure below.
Installation Procedure (continued)
After fixing the indoor unit, open front grille and then
insert refrigerant pipe, drain hose and electric cable from
outdoor through the wall into the unit case, then connect
drain hose together and arrange it.
Note : Do not put the drain hose end into water.
Verification of condensate water drainage:
Fill the drain pan with water and observe evacuation.
■
Unit Coupling
1
Connect electric cable to terminal box.
2
Connect refrigerant pipe to flare connector.
Ceiling case
Floor case
N
1
2
Terminal box
Flare connector
03_install.p65
19/4/02, 14:48
14
