ROOM AIR CONDITIONERS
2
IOM # 036 - 3007 TP (0206)
!
CAUTION
Â
ALL WIRING MUST COMPLY WITH LOCAL AND
NATIONAL ELECTRICAL CODES.
Â
WIRING SHOULD BE INSTALLED BY A QUALIFIED
ELECTRICIAN. IF YOU HAVE ANY QUESTIONS
REGARDING THE FOLLOWING INSTRUCTIONS,
CONTACT A QUALIFIED ELECTRICIAN.
Â
NEVER INSERT YOUR FINGERS OR ANY FOREIGN
OBJECTS INTO THE AIR OUTLET. TAKE SPECIAL
CARE TO WARN CHILDREN OF THESE DANGERS.
Â
TO AVOID THE POSSIBILITY OF PERSONAL INJURY,
BE SURE TO DISCONNECT POWER TO THE UNIT
BEFORE INSTALLING AND/OR SERVICING AND/OR
CLEANING.
Â
IF THE SUPPLY CORD IS DAMAGED, IT MUST BE
REPLACED BY THE MANUFACTURER OR ITS
SERVICE AGENT OR A PERSON NOMINATED BY ITS
AUTHORIZED DISTRIBUTOR IN ORDER TO AVOID A
HAZARD.
1. The power cord is distinguished by the cord color as
shown in figure 1.
2. For your safety and protection, this unit is grounded
through the power cord plug when plugged into a
matching wall outlet (figure 2). Please contact the
manufacturer, its authorized distributor or service agent
if you want to replace it.
3. For electrical power supply, see the specification on the
unit name plate.
Electrical safety and rules ............................................... 2
Power connections .......................................................... 2
Exploded view ................................................................. 2
Accessories ..................................................................... 2
Points to remember ......................................................... 3
Operating Instructions ..................................................... 3
Maintenance .................................................................... 5
Cleaning the air filter ....................................................... 5
Cleaning the front panel .................................................. 5
End of the season maintenance ...................................... 5
Trouble shooting.............................................................. 5
Installation ....................................................................... 6
Drainage condensed water ............................................. 7
CONTENTS
ELECTRICAL SAFETY AND RULES
Figure 2
Figure 1
4. Be sure that the unit being correctly grounded. The wall
outlet (air break switch) should be provided with reliable
earthing wire and should be accessible after installation.
5. The unit should be provided with an individual branch
circuit and the fuse size should be same as that of the
power cord plug and wall outlet.
EXPLODED VIEW & ACCESSORIES
1. Front panel.
2. Air filter.
3. Frame.
4. Cabinet.
5. Air inlet for cooling condenser
coil.
6. Supply air grill.
7. Cover for controls (some
models only).
8. Power supply cord.
ACCESSORIES
Seal
1
8
Screws
(Wood)
1
Drain Plug
(Option)
1
Drain Pan
(Option)
2
Screws
(Front Panel)
