REMOVE
INSTALLATION INSTRUCTIONS
SMOKE DETECTOR KIT
MODEL# 2SD04700124
INSTALLATION
INSTRUCTIONS
SUPPLY AIR APPLICATION
Step 1:
Remove the clear cover of
the smoke detector.
Step 2:
Insert 23” sampling tube
in the inlet tube of the
smoke detector. Make
sure the air holes of the
s a m p l i n g t u b e f a c e
towards the airflow.
Step 3:
Place the sampling tub
f i l t e r s i n t o b o t h t h e
exhaust tube and the inlet
tube.
Step 4:
Insert red tube plug into
the end of sampling tube.
Step 5:
Attach smoke detector to
supply bracket with the
10-16 x 1 ½” screws.
Step 6:
O p e n b l o w e r a c c e s s
panel and remove the two
screws shown above.
Step 7:
Align hole in the smoke
detector bracket with the
holes where screws were
removed in Step 6 and
secure. Plug the plug
(P14) of wire harness into
the Socket (S14) of the
unit.
SHOWS AIR HOLE
LOCATION
FILTER
RED PLUG
BRACKET
P14
S14/P14
PLUG
