Operation instructions of wire controller
36
4
）
If the backlight is on, under daily display state, when press the running key, such as the
mode/temperature key, etc., the first press will not trigger the operation, and this will only
transfer the state from the daily display state to the operation interface, and the saved
setting value will be displayed, and then the second keypress will change the setting value.
4.6 Mechanical switch key
Referenced basic function
4.7 Buzzer
When it is energized for power-on, it shall be operated for 100 mS
When release the key after pressing (including the switch key) it, it shall be operated for 100mS
Until Auto-Off
4.8 Backlight
Two indication states of the backlight
Bright: it should be this state when the screen protection is not operated
Dim bright: it should be this state when the screen protection is operated
4.9 Functions
4.9.1 Basic Functions
No.
Main
Function
Function
Key
Operation Instructions
1
Unit Power
ON/OFF
Short press this key to switch unit’s on and off status. When the status of
the unit is on, if you short press this key, it will turn off the unit; When the
status of the unit is off, if you short press this key, it will turn on the unit.
The precondition for the execution of the key is that the backlight is on. If
the backlight is off, the first keypress can only illuminate the backlight.
2
Selection key
for cooling
mode
Precondition: under daily display state or mode setting state:
1
）
Press any mode setting key to enter the mode setting state;
2
）
Display the “SET” icon
of the temperature display area;
3
）
Short press the
key and the cooling icon
will flash;
4
）
Do not input anything within 10 seconds or short press the
key
to confirm the current operation and return to the daily display state;
5
）
Short press the
key to cancel the current operation and return to
the daily display status.
3
Selection key
for heating
mode
Precondition: under daily display state or mode setting state:
1
）
Press any mode setting key to enter the mode setting state;
2
）
Display the “SET” icon
of the temperature display area;
3
）
Short press the
key and the heating icon
will flash;
4
）
Do not input anything within 10 seconds or short press the
key
to confirm the current operation and return to the daily display state;
5
）
Short press the
key to cancel the current operation and return to
the daily display status.
Cooke Industries - Phone: +64 9 579 2185 Email: [email protected] Web: www.cookeindustries.co.nz