www.yorkfitness.com
12
Hand Pulse Sensors
This cross trainer is fitted with 2 hand pulse
sensors. To obtain a pulse reading you must
have both your left and right hands on the
sensors at the same time. Do not grip the hand
sensors too tight and allow the computer a few
seconds to display the reading.
Adjusting The Resistance
This cross trainer features a speed independent
braking (resistance) system. The resistance is
controlled by a magnet, which is moved closer
or further away from the flywheel - the closer
the magnet is to the flywheel the higher the
resistance.
Levelling Your Cross Trainer
To help you level the cross trainer on uneven
surface, 2 height adjusters are included on the
rear stabilizers. Simply twist these around to
adjust the height of the cross trainer.
Operational instructions
A
C
T
I
V
E
1
1
0
Hand Pulse Sensor
A
C
T
I
V
E
1
1
0
Resistance Level
A
C
T
I
V
E
1
1
0