1083294-UIM-C-0615
Johnson Controls Unitary Products
21
FIGURE 26:
Upflow Configuration
When drain hose routing changes are required, be sure to cap all un-used openings.
If rerouting hoses - excess length should be cut of
f so that no sagging loops will collect
and hold condensate, which will cause the furnace to not operate.
INDUCER ROT
A
TED FOR
LEFT
SIDE VENTING
UPFLOW
AS RECEIVED
INDUCER ROT
A
TED FOR
RIGHT
SIDE VENTING
C
ondensate drain may exit cabinet on either side.
For 100 & 120 input furnaces, the condensate
drain is plumbed toward the left casing outlet from the factory.
For 040, 060 & 080K input furnaces, the condensate
drain is plumbed toward the right casing outlet from the factory.
Shorten
rain
gutter
hose.
R
e-route and
shorten
pressure
switch hose.
Shorten
pressure
switch hose
Move rain
gutter hose
to this position
1
2
2
1
