York Fitness Staminatreadmill, Owner'S Manual

Page: 10 / 24

10
aSSemBLy InStrUCtIonS
final check
Your York stamina treadmill is now assembled. Please
make the following final checks:
Make sure all screws / bolts are tightened. •
Make sure the equipment is on a flat, level surface. •
Power uP
Plug one end of power cable into the treadmill as 1.
shown.
Plug the other end into a suitable AC outlet (220- 2.
240 volt, 50Hz).
Switch the treadmill on using the on/off switch. 3.
Attach the safety key to the console. 4.
note: before you run on the treAdmill for the first
time, use the quicK stArt instruction And Allow the
treAdmill to run independently for 10 minutes. checK
the running mAt is tightened correctly And runs
smoothly. if you thinK the mAt needs AdJusting pleAse
see neXt pAge for more detAils.
steP 4
Follow “Easy-lift Fold Up” and “Moving The Treadmill”
instructions to remove treadmill from the box.
risk warning
only fold And moVe the treAdmill by following the “eAsy-lift fold up” And “moVing the treAdmill” instructions. do
not put the product on its side or try to lift the treAdmill. fAilure to follow this procedure mAy result in serious
inJury due to pinch point AreA on the front frAme neAr the motor coVer.