www.yorkfitness.com.au
www.yorkfitness.com.au
5
www.yorkfitness.com.au
ASSEMBLY INSTRUCTION
Step 1
Attach the front stabilizer (3) to the main frame (1). Secure using two carriage bolts (2), two
curved washers (6) and two domed nuts (7).
Connect the sensor wire (21) to the sensor wire from the back of the console (9).
Attach the console (9) to the console bracket (62) and tighten with two screws (10).
NOTE: Ensure that the wires are not pinched behind the console.
2
6
7
6
7
21
3
9
10
1
62
Step 2
Attach the pedal support tube (17) to the middle of the main frame (1). Secure using two
carriage bolts (19), two flat washers (25) and two domed nuts (7)
Attach the left pedal (14L) to the left bracket of the pedal support tube (17). Slide the axle
for pedal (15) through the left pedal (14L). Secure using two allen bolts (12) and two flat
washers (13).
Repeat the same procedure for the right pedal (14R).