71
60
101
70
58
68
70
40
101
60
71
SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY
INSTRUCTION
25
You will need assistance to pass the narrow end of
the
BENCH PRESS ARM
(40) either side of
the
SIDE WEIGHT COVER
S (108) from the
front and align with pivot tube mounted on
the
REAR MAIN UPRIGHT
(30).
NOTE:
Ensure bracket in centre is on the left
side as illustrated.
Insert the
PIVOT ROD
(127) through one side of
the
BENCH PRESS ARM
(40), through
the pivot tube mounted on the
REAR MAIN UPRIGHT
(30)
and out flush with the other side of the
BENCH PRESS ARM
(40),
then secure using the bolts, washers and plastic caps as illustrated.
Attach the top hole of the
UPPER HEIGHT ADJUSTER
(25)
to the bracket on the cross bar of the
BENCH PRESS ARM
(40)
using the nut, bolt and washers as illustrated.
BENCH
PRESS
ARM
M10 X 50mm HEX HEAD BOLT X
1
58
M10 X 25mm HEX HEAD BOLT X
2
60
10.5mm X 23mm X 2mm
FLAT WASHER X
2
70
M10 NYLON
LOCKNUT X
1
68
10.5mm X 40mm X 3mm
FLAT WASHER X
2
71
17 X 17 X 44mm
PLASTIC END CAP X
2
101
NOTE:
Remove
PIVOT ROD
from
REAR MAIN
UPRIGHT
before fitting
BENCH PRESS
ARM
, then refit.
127
YORK G570 / 31