manualshive.com logo in svg

York Fitness G-570, Instruction Manual, Page: 17 / 48

Share
Download
York Fitness G-570 Instruction Manual Download Page 17

68

70

68

70

27

111

111

46

70

28

80

SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY

INSTRUCTION

 13

Mount the 

SEAT ADJUSTING BRACKET

 (28) 

to the centre hole of the 

SEAT SUPPORT

 (27) using 

the nut, bolt and washers as illustrated.

Attach the rear hole of 

SEAT SUPPORT

 (27) to 

the front hole of 

SEAT GLIDE ASSEMBLY

 (18) 

top bracket using 2 x 

SPACER

 (111), nut, bolt and 

washers as illustrated.

NOTE:

 Ensure the bolt passes first through one 

                side of 

SEAT SUPPORT

 (27), then 

                through 1 x 

SPACER

 (111) before passing 

                through 

SEAT GLIDE ASSEMBLY

 (18), 

nd

                

2  SPACER

 (111) and out the other side 

                of the 

SEAT SUPPORT

 (27).

Secure the front of the 

SEAT SUPPORT

 (27) by 

passing 

PULL PIN

 (81) through 

SEAT ADJUSTING 

BRACKET

 (28) and the bush on top 

SEAT GLIDE ASSEMBLY

 (18).

M10 X 165mm HEX HEAD BOLT X 

2

  10.5mm X 23mm X 2mm

FLAT WASHER X 

4

68

70

M10 NYLON

LOCKNUT X 

2

46

SEAT 
SUPPORT

SEAT 

ADJUSTING 

BRACKET

SPACER

YORK G570 / 15

Summary of Contents for G-570

















































Reviews:

No comments