manualshive.com logo in svg

York Fitness G-570, Instruction Manual, Page: 15 / 48

Share
Download
York Fitness G-570 Instruction Manual Download Page 15

70

24

77

25

68

SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY

INSTRUCTION

 11

Secure 

LOWER HEIGHT ADJUSTER

 (24) 

to the threaded pin of the 

PRESS PULLEY BRACKET

 (22) 

using the nut, bolt and washer illustrated.

NOTE:

 Ensure the pivot bush of 

LOWER HEIGHT 

           ADJUSTER

 (24) is facing towards the front.

Screw the 

SPRING LOADED PULL/TWIST PIN

 (77) 

into the assembly as illustrated.

Pull out 

SPRING LOADED PULL/TWIST PIN

 (77) and 

Slot 

UPPER HEIGHT ADJUSTER

 (25) into the top of 

the 

LOWER HEIGHT ADJUSTER

 (24) releasing 

the pin to secure in the bottom adjustment hole.

NOTE:

 When inserting 

UPPER HEIGHT ADJUSTER

 (25) 

                ensure the single bushed hole is at the top.

  10.5mm X 23mm X 2mm

FLAT WASHER X 

2

68

70

M10 NYLON

LOCKNUT X 

1

UPPER HEIGHT 

ADJUSTER

SPRING 

LOADED 

PULL/TWIST 

PIN

LOWER 

HEIGHT 

ADJUSTER

70

YORK G570 / 13

Max.

MAKE SURE

 

The

warning “

Max.

” is

facing outwards.

Summary of Contents for G-570

















































Reviews:

No comments