background image

www.yorkfitness.com

14

Adjust the seat

1.  Unscrew the hand wheel.
2.  Adjust the seat up / down or forward / 

backward to your requirements.

3.  Re-screw the hand wheel - make sure it is 

screwed tightly.

4.  The basic rule for getting the seat height 

right is that as the pedal reaches its lowest 
point, the leg is almost straight.

Note: Do not pull the seat out too far - the 
maximum is indicated with a piece of tape on 
the seat post.

Operational instructions

E

X

C

E

L

3

1

0

Care & Maintenance

•  This equipment should not be placed outdoors, in a garage or an outbuilding. Keep the 

equipment in a dry place with as little temperature variation as possible. 

•  We recommend placing a mat beneath the equipment to protect both the equipment 

and your flooring. 

•  Always place the equipment in a dry environment.
•  Use a warm, damp cloth to keep the product clean.
•  No wet cleaning of electrical components. Unplug before any care and maintenance.
•  The safety level of the equipment can be maintained only if it is regularly examined for 

damage and wear. This includes any ropes, pulleys, nuts, bolts, moving parts, bushes, 
chains, wheels, bearings & connection points etc.

•  Ensure that you inspect the product regularly - at least once a week is recommended.
•  Ensure that all fixings are tight before use.
•  Always replace damaged / worn components with original parts from the manufacturer.

Summary of Contents for Excel 310





















Reviews: