York Fitness diamond x302, Owner'S Manual, Page: 11 / 20

user instructions
11
Button Functions
Pre – workout During workout
starts the workout
stops the workout
– press again to resume
In ‘program setting’ mode it will
reset the current value – press
twice to return to the main menu
press and hold to return to the ‘main
menu’ screen - can only be use d when
the workout has stopped
adjust values in ‘program
setting’ mode
increase or decrease the resistance
level during the workout
enter the fitness test program
– use when your workout has
ended
selects the feedback mode currently
displayed
(speed/time/distance) or (rpm/calo-
ries/watts)
Quick Start
Use this mode if you just want a quick workout session and are not interested in setting up any
personal data :
1. Make sure the cross trainer is plugged in
2. Press the ‘start / stop’ button
3. Begin pedalling
4. Use the ‘up / down’ buttons to adjust the resistance
5. The values of time, distance and calories will start counting upwards
Console Display and Feedback
Time
Time exercised this session; default
counts up from zero, but counts down if
a target has been set
Speed
Current speed you are pedalling at, in
km/h
Distance
Distance travelled this session; default
counts up from zero, but counts down if
a target has been set
Calories
Approximate calories burned this
session (for comparison only, not to
be used for medical purposes); default
counts up from zero, but counts down if
a target has been set
Pulse
Current heart rate in beats per minute
(bpm)
RPM
Current revolutions per minute
Fat%
Displays your body fat % (for
comparison only, not to be used for
medical purposes)
Watt
Current level of effort being used,
expressed in watts
BMI
Displays BMI calculation
start / stop
reset
up / down
fitness test
mode
body fat
confirms selections during
‘program setting’ mode
enter body fat analysis and
BMI mode