York Fitness DIAMOND X301 Owner'S Manual Download Page 16

16

Calculating your target heart rate

First, you need to find your estimated maximum heart rate using the 
formula 220 minus your age in years.  So, if you are 35 years old your 
estimated maximum hear rate is:

220 - 35 = 185 beats per minutes (bpm)

Next, to calculate your target heart rate, simply multiply your  
estimated maximum heart rate (185bpm) by the applicable  
percentage.  So, if your goal is better heath:

185 x 60% = 111bpm

NOTE: Heat rate training requires you to monitor your heart rate  
throughout the workout.  For this we recommend using a chest strap  
(if your machine has a wireless receiver) or a heart rate monitor.  For  
more information please visit yorkfitness.com or get in touch using the 
Contact Us details on page 5.

Heart Rate Training

To get the most out of your new piece of fitness equipment and see 
the best results from your training you should exercise at the right 
level of effort, and that means listening to your heart!   Working out 
to a target heart rate means you can direct your workout to achieve 
different goals:

Good health

 - For those wishing to improve quality of life and 

general well being.  Your sessions will need to be done at an 
intensity of between 50-60% of your estimated maximum heart 
rate, should last about 30 minutes and can be done on most 
days of the week.

Weight loss

 – To see a significant reduction in body fat, your 

sessions must be a little more intense - between 60 and 70% of 
your estimated maximum heart rate.  These sessions can also be 
performed on most days of the week for up to 30 minutes.

Improving Fitness levels

 –These sessions should be performed 

at 70-80% of your estimated maximum heart rate and can also 
involve bouts of interval training that would have your heart 
rate peaking for short times near your maximum heart rate level. 
These are intense sessions and will require at least a 48 hour rest 
between sessions.

NOTE: The important issue to remember with 

all estimated calculations is that they are just 

estimates – if you don’t feel comfortable exercising 

at your target then reduce it to a level you are 

comfortable with.

!

exercising with your cross trainer

Correct exercising form

 

Stand tall and straight.  Don’t slump - it will put unnecessary 

strain on your back and will result in less effective toning 

in the leg muscles.  Make sure the machine is adjusted 

properly for your height so that you don’t have to slouch 

to reach the handlebars.  Similarly, you should not be 

leaning on the handles or gripping them too tightly.

 

Stay relaxed.  Keep your shoulders, arms, legs and hips loose 

and unlocked while using a cross trainer.  Tension could 

lead to injury and will almost certainly make you sore.

All over body workout!

 

For an all over body workout keep your hands on the moving arms

 

To only work the lower body place the 

hands on the fixed handlebars

 

To put the emphasis on the upper body push with 

your arms on the moving arms and reduce the 

amount of effort you are using with your legs

 

To work different muscles in your legs, try going in reverse

!

Always consult your doctor 

before undertaking a new 

exercise regime

If you experience nausea, dizziness or other abnormal 

symptoms during exercise, stop at once and consult 

your doctor

Starting your workout

Begin and end each workout with a Warm Up / Down session – a few minutes 

of stretching to help prevent strains, pulls and cramps

 

Make sure the nearest footplate to you is in the lowest position

 

Grasp the handlebars securely with both hands

 

Step on - put your feet into the pedals one by one

 

Your body should be centred over the pedals

 

Begin to stride, follow the rhythm of the machine

Finishing your workout

 

Slow your elliptical motion to a gradual stop

 

Take your feet off the footplates one at a time

End each workout with a Warm Down session – a few minutes 

of stretching to help prevent strains, pulls and cramps

How long should I exercise for?

That really depends on your current level of fitness.  If you’re just starting out on a new exercise program, you should start gradually and build 

up - do not  try to do too much too quickly.  30 minutes, 3 times a week should be enough.  Don’t push yourself too hard - you should never 

feel exhausted during or following exercise.

Summary of Contents for DIAMOND X301





















Reviews: