www.yorkfitness.com
www.yorkfitness.com
11
Hand Pulse Sensors
This exercise equipment is fitted with 2 hand
pulse sensors. To obtain a pulse reading you
must have both your left and right hands on
the sensors at the same time. Do not grip the
hand sensors too tight and allow the computer
a few seconds to display the reading.
A
C
T
I
V
E
1
2
0
Hand Pulse Sensor
Levelling
To help you level the equipment on uneven
surface, 2 height adjusters are included on the
rear stabilizers. Simply twist these around to
adjust the height of the equipment.
A
C
T
I
V
E
1
2
0
Adjust The Seat
Simply adjust the knob under the seat to
move forward or backward.
Adjust The Seat Height
Note: Do not pull the seat out too far - the maximum is indicated
with a piece of tape on the seat post.
1. Unscrew the hand wheel.
2. Adjust the seat up or down to your required height - to line it
up correctly, make sure the number and line is visible at the
top of the seat post mounting tube.
3. Re-screw the hand wheel - make sure it is screwed tightly.
4. The basic rule for getting the seat height right is that as the
pedal reaches its lowest point, the leg is almost straight.
A
C
T
I
V
E
1
2
0
Operational instructions