When impulse mode is activated, single push of UP or DOWN button forces motor to make single part of a full turn, and
when UP or DOWN button is being held for 2 seconds it will force motor to run constantly (to the pint it reaches its limit
position).
Procedure should be performed when motor works in direction other than expected (e.g. when pressing UP button roller
shutter is being lowered).
Switch power on.
Press and hold STOP and UP
buttons at the same time
for about 6 seconds
('SET3' sign starts to flash).
'good' sign will flash three times
confirming, that impulse mode
has been activated.
Repeat these steps
to deactivate pulse mode.
Switch power on.
Press and hold UP / DOWN buttons
at the same time
for about 6 seconds
('SET1' sign starts to flash).
After 6 seconds symbol “good” will flash
3 times on the display signalizing, that
motors direction of rotation was
successfully changed.
Changing motors direction
Activating impulse mode
In order to fully explore available functions of MAGNETIC series please take a moment and read this manual before using the device. MAGNETIC transmitters
are compatible with all YOODA brand devices.
MAGNETIC_1CfT
www.sukcesgroup.pl
