When programming key-ring remotes that do not have additional P2 programming button the same function is substituted
with simultaneous push of STOP and UP buttons.
Longer than 5 seconds pause between series of button clicks during programming will cause device to switch off from
programming mode without saving any changes.
Programming key-ring remotes
INSTRUCTION FOR 'R' TYPE MOTORS: 35R AND 45R
Non-compliance with the specification might cause risk for life or health and can determine proper work of the roller shutter.
We strongly recommend to comply with the specification.
Installation of the tubular motor should be performed by specialists with 1kV or higher SEP-certified electrician's licence
(SEP - Association of Polish Electrical Engineers) or equal license.
www.sukcesgroup.pl
Turn on power supply or press
microswitch (approx. 2 sec.)
when power is on.
Motor will make a sound.
Roller shutter will make an
up/down move.
Motor will
make a sound.
or
Roller shutter will
make an up/down
move as the motor will
make few sounds.
Motor will
make a sound.
Press
UP button
on the remote.
Simultaneously
press STOP
and UP
programming buttons.
Simultaneously
press STOP
and UP
programming buttons.