14
Figure 6-13 Throttle level setting
6.10 Power-on password setting
PA is the power-on password setting. The power-on password is not activated by default but users can activate it from
setting PSd-y. The factory default password is 1212. Users can set other four-digit password. Please keep the password in
mind after changing it, otherwise you will not be able to use the display.
Press
to enter the parameter changing state. Press the
/
to select the parameter. PSd-y means the
power-on password is activated while PSd-n is off. Press
to confirm the mode and enter the state of setting the four
digits power-on password or exit to the personalized parameter setting interface.
Figure 6-14 Power-on Password OFF interface
Figure 6-15 Power-on Password Activated interface
