3
Trip distance indicator
ODO
Fig. 5-1 Display Interface Switching
5.3 Headlight on/off
By pressing and holding the button
, the controller will turn on the headlights and the display backlight will turn
dark. By pressing and holding the button
again, the controller will turn off the headlights and the display backlight will
resumes the luminance.
5.4 Assist level selection
When TRIP is shown, by pressing the button
/
, the e-bike assist level will be switched to change the motor
output power. There are three assist levels available: ECO, MID and HIGH.
ECO indicator interface
MID indicator interface
HIGH indicator interface
Fig. 5-2 Assist Level Switching Interface
5.5 Battery level indicator
The battery level indicator consists of four segments. When the battery is fully charged, the four segments will be all
on. In case of undervoltage, the last segment of the battery indicator will flash, which means the battery has to be charged
immediately.
Full battery level indication
3-segment indication
2-segment indication
1-segment indication
Undervoltage flashing
Fig. 5-3 Battery Level Indicator Interface
5.6 Error code indicator
When a fault occurs in the electronic control system of your e-bike, the display will automatically indicate the error
code in the distance area in the format of E0**. Detailed definitions of error codes are shown in
Schedule 1
.
