1
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received,including interference that may cause undesired operation.
Attention that changes or modification not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This product generates, uses, and can radiate radio frequency energy and,if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this product does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on,the user
is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
EMC DECLATION
The analyzer needs special precautions regarding EMC and needs to be installed and put into service according
to the below EMC information.
Statement:
The equipment with following ESSENTIAL PERFORMANCE is intended used in Home healthcare
environment and professional healthcare facility environment.
If Essential Performance is lost or degraded due to electromagnetic disturbances,this may result in inaccurate
measurement and lead to mislead patients, please read below important information before to avoid possible
electromagnetic disturbances.
Warning
：
Using cell phone or microwave oven, HF surgical equipment, magnetic resonance imaging or other radio radiant
equipment near this product may cause malfunction or lead to loss of essential performance, which means that the
measurement accuracy will be affected.
Use of this equipment adjacent to or stacked with other equipment should be avoided because it could result in
improper operation.If such use is necessary, this equipment and the other equipment should be observed to verify that
they are operating normally.
Portable RF communications equipment(including peripherals such as antenna cables and external
antennas)should be used no closer than 30 cm(12 inches)to any part of the analyzer.Otherwise,degradation of the
performance of this equipment could result.
Use of accessories,transducers other than those specified or provided by the manufacturer of this equipment
could result in increased electromagnetic emissions or decreased electromagnetic immunity of this equipment and
result in improper operation.
Caution:
Security,antitheft,and radiofrequency identification(RFID)devices.Some electromagnetic anti-theft systems and
metal detectors such as those used at entrances or exits of department stores,libraries,and other public places,and
airport security screening devices may affect the analyzer.Additionally,RFID devices,which are often used to read
identification badges,as well as some tag deactivation devices,such as those used at payment counters at stores and
loan desks at libraries,may also affect the analyzer.Please do not use analyzer near these places.If you have to go
