1
IEC 62304,ISO1497.
十二、
Disposal
Dispose of the device in accordance with the regulations applicable at the place of operation.
Dispose of at public collection point in the EU countries–2002/96/EC WEEE Directive.
If you have any queries,please refer to the local authorities responsible for waste disposal.
NOTES:
Handing of battery and wastes method,please act according to the native law to proceed to handle.
To protect the environment,dispose of empty battery at your retail store or at appropriate collection sites
according to national or local regulations.
十三、
EMC
RF STATEMENT/FCC statement
RF STATEMENT
Medical Electrical Equipment needs special precautions regarding EMC and needs to be installed and put into
service according to the EMC information provided in the following section.
Interference may occur in the vicinity of equipment marked with the following symbol
.
Portable and mobile RF communication equipment(e.g. cell phones)can affect Medical Electrical Equipment.
The use of accessories and cables other than those specified may result in increased emissions or decreased immunity.
The device uses RF energy only for its internal function. Therefore, its RF emissions are very low and are not
likely to cause any interference in nearby electronic equipment.
The device is suitable for use in all establishments, including domestic establishments and those directly
connected to the public low voltage power supply network that supplies buildings used for domestic purposes.
Portable and mobile RF communications equipment should be used no closer to any part of the device, including
cables, the recommended separation distance calculated from the equation applicable to the frequency of the
transmitter.
The device is intended for use in an electromagnetic environment in which radiated RF disturbances are
controlled. Any other accessories, transducers and cables may result in increased emissions or decreased immunity
and EMC performance.
The device should not be used adjacent to or stacked with other equipment and if adjacent or stacked use is
necessary, it should be observed in order to verify normal operation in the configuration in which it will be used.
Medical Electrical Equipment needs special precautions regarding EMC and needs to be installed and put into
service according to the EMC information provided in the following. Portable and mobile RF communication
equipment(e.g.cell phones)can affect Medical Electrical Equipment. The use of accessories and cables other than
those specified may result in increased emissions or decreased immunity of the unit.
FCC statement
