<4. Wiring>
33
IM 01E25A01-01EN
F0430.ai
Cover locking screws
(1)
(2)
Figure 4.4.7 Removing the Terminal Box Cover for Integral
Flowmeter
(2)
(3)
Cover locking screws
F0431.ai
(1)
Figure 4.4.8 Removing the Terminal Box Cover for AXW4A
Remote Transmitter
2) Terminal Configuration
When the cover is removed, the connection
terminals will be visible.
The description of the terminal symbols is shown in
Figure 4.4.7 or Figure 4.4.8.
3) Wiring Procedure
1. Check the instrument’s power is off.
2. Wire the signal cable and excitation cable to
each terminal.
3. Install the terminal cover.
4) Installing the Cover
Install the cover to the flowmeter by turning
it clockwise. Tighten the cover locking screw
(1 and 3) (See Figure 4.4.5 and Figure 4.4.6)
counterclockwise using a hexagonal wrench
(nominal size 3) to lock the cover.
(2) Terminal Configuration
(Integral Flowmeter and AXW4A Transmitter)
F0432.ai
M4 Screw Type
Integral Type/AXW4A Remote Transmitter:
<To be wired to Power Supply and I/Os>
Clamp Type
Terminal Symbol
N/-
L/+
I/O4 -
I/O4 +
I/O3 -
I/O3 +
I/O2 -
I/O2 +
I/O1 -
I/O1 +
Refer to
Input/Output Table
Functional Grounding
Shorting Screw
(Need to be fixed for normal operation)
Protective Grounding
(Inside and outside of the terminal box)
Description
Power Supply
Protective
Grounding Terminal
Protective
Grounding Terminal
Integral Flowmeter
AXW4A Remote Transmitter
Figure 4.4.9 Terminal Configuration (Integral Flowmeter and
AXW4A Remote Transmitter)
W
iring
4
