8
<Read Me First>
IM 01W02E01-11EN
n
Regulatory Compliance for Radio and Telecommunication
Please confirm that an installation region fulfills a standards, require additional regulatory infor
-
mation and approvals, contact to Yokogawa Electric Corporation.
l
Radio Equipment Directive
Hereby, Yokogawa Electric Corporation declares that the radio equipment type YFGW510 is in
compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is avail
-
able at the following internet address:
http://www.yokogawa.com/fld/
l
EMC Conformity Standards
EN 301 489-1, EN 301 489-17, EN 61326-1 Class A, Table 2 (For use in industrial locations),
EN55011 Class A, Group 1, EN61000-6-2
This instrument is a Class A product, and it is designed for use in the industrial environment.
Please use this instrument in the industrial environment only.
l
Safety Conformity Standards
Applicable standard: EN61010-1, EN 62311
(1) Pollution Degree 2
“Pollution degree” describes the degree to which a solid, liquid, or gas which deteriorates dielec
-
tric strength or surface resistivity is adhering. “2” applies to normal indoor atmosphere. Normally,
only non-conductive pollution occurs. Occasionally, however, temporary conductivity caused by
condensation must be expected.
(2) Installation Category I
“Overvoltage category (Installation category)” describes a number which defines a transient
overvoltage condition. It implies the regulation for impulse withstand voltage. “I” applies to electri
-
cal equipment which is supplied from the circuit when appropriate transient overvoltage control
means (interface) are provided.
l
Spectrum Conformity Standard
EN 300 328
