IM 12B06W02-03E-E
2
2.6 Dimensional drawing for suffix-V
Length (L)
: 2, 3, 5, 10, 20, 30m
(6.6, 9.8, 16.4, 32.8,
65.6, 98.4 ft)
Dia. connector (D) : 10.6 ± 0.2 mm
(0.417 ± 0.008 inch)
Dia. cable (d)
: 5.8 ± 0.1 mm
(0.228 ± 0.004 inch)
Wire pins
: 8 x 1.3 mm
(0.31 x 0.05 inch)
2.7 Dimensional drawing for suffix-S
Length (L)
: 1, 2, 3, 5, 10, 20, 30,
100m
(3.3, 6.6, 9.8, 16.4,
32.8, 65.6, 98.4 328 ft)
Dia. connector (D) : 12.5 ± 0.2 mm
(0.471 ± 0.008 inch)
Dia. cable (d)
: 5.8 ± 0.1 mm
(0.228 ± 0.004 inch)
Wire pins
: 8 x 1.3 mm
(0.31 x 0.05 inch)
2.8 Cable installation
Procuring a smooth bend radius allows the
cable to absorb the impact of bending and
thereby increasing its life cycle.
Minimum bend radius is approx. 5 cm (2”).
When using cable ties, do not pinch or deform
the cable.
When connected cable is subjected to any
motion between two points, stress on the cable
can be prevented by an adequate cable length
or using a cable loop.
2.3 Connector materials
Housing
: Polybutylene terephthalate
UL94V-0, color: black.
O-ring
: Nitrilbutadieenrubber,
color: black.
Nut : Brass.
Contact finishing : Gold plated.
Outer sleeve
finishing : Polyvinylchloride
2.4 Electrical specifications
Twisted pair cables : Capacity < 50 pF/m
Resistance < 100 Ω/km
Characteristic
Impedance < 120 Ω
Connector
: Maximum rated current
5 A
Maximum voltage
125 V
2.5 Operational specifications
Temperature
: -20 ~ +85 °C
(-4 ~ +185 ºF)
Water Proof (CN)
: IP67 (conform
IEC60529)
Figure 1.
Dimensions
