manualshive.com logo in svg

YOKOGAWA WT3001E, User Manual, Page: 56 / 179

Share
Download
YOKOGAWA WT3001E User Manual Download Page 56

6-12

IM WT3001E-17EN

Command

Function

Page

 

MOTor Group

:MOTor?

Queries all settings related to the motor evaluation function.

6-81

:MOTor:FILTer?

Queries all settings related to the input filter.

6-81

:MOTor:FILTer[:LINE]

Sets the line filter or queries the current setting.

6-81

:MOTor:PM?

Queries all settings related to the motor output (Pm).

6-81

:MOTor:PM:SCALing

Sets the scaling factor used for motor output computation or queries the 

current setting.

6-81

:MOTor:PM:UNIT

Sets the unit to add to the motor output computation result or queries the 

current setting.

6-81

:MOTor:POLE

Sets the motor’s number of poles or queries the current setting.

6-81

:MOTor:SPEed?

Queries all settings related to the rotating speed.

6-81

:MOTor:SPEed:AUTO

Turns ON/OFF the voltage auto range of the revolution signal input (analog 

input format) or queries the current setting.

6-81

:MOTor:SPEed:PRANge

Sets the range of the rotating speed (pulse input format) or queries the 

current setting.

6-82

:MOTor:SPEed:PULSe

Sets the pulse count of the revolution signal input (pulse input) or queries the 

current setting.

6-82

:MOTor:SPEed:RANGe

Sets the voltage range of the revolution signal input (analog input format) or 

queries the current setting.

6-82

:MOTor:SPEed:SCALing

Sets the scaling factor for rotating speed computation or queries the current 

setting.

6-82

:MOTor:SPEed:TYPE

Sets the input type of the revolution signal input or queries the current 

setting.

6-82

:MOTor:SPEed:UNIT

Sets the unit to add to the rotating speed computation result or queries the 

current setting.

6-82

:MOTor:SSPeed(Sync SPeed source)

Sets the frequency measurement source used to compute the synchronous 

speed (SyncSp) or queries the current setting.

6-82

:MOTor:SYNChronize

Sets the synchronization source used to compute the rotating speed and 

torque or queries the current setting.

6-82

:MOTor:TORQue?

Queries all settings related to the torque.

6-82

:MOTor:TORQue:AUTO

Turns ON/OFF the voltage auto range of the torque signal input (analog input 

format) or queries the current setting.

6-83

:MOTor:TORQue:PRANge

Sets the range of the torque (pulse input format) or queries the current 

setting.

6-83

:MOTor:TORQue:RANGe

Sets the voltage range of the torque signal input (analog input format) or 

queries the current setting.

6-83

:MOTor:TORQue:RATE?

Queries all settings related to the rated value of the torque signal (pulse input 

format).

6-83

:MOTor:TORQue:RATE:{UPPer|LOW

er}

Sets the rated value {upper limit|lower limit} of the torque signal (pulse input 

format) or queries the current setting.

6-83

:MOTor:TORQue:SCALing

Sets the scaling factor used for torque computation or queries the current 

setting.

6-83

:MOTor:TORQue:TYPE

Sets the input type of the torque signal input or queries the current setting.

6-83

:MOTor:TORQue:UNIT

Sets the unit to add to the torque computation result or queries the current 

setting.

6-83

 

NUMeric Group

:NUMeric?

Queries all settings related to the numeric data output.

6-84

:NUMeric:CBCycle?

Queries all settings related to output of numeric list data of Cycle by Cycle 

measurement. 

6-84

:NUMeric:CBCycle:END

Sets the output end cycle of the numeric list data output by 

:NUMeric:CBCycle:VALue? or queries the current setting. 

6-84

:NUMeric:CBCycle:ITEM

Sets the numeric list data output items (function and element) of Cycle by 

Cycle measurement or queries the current setting. 

6-84

:NUMeric:CBCycle:STARt

Sets the output start cycle of the numeric list data output by 

:NUMeric:CBCycle:VALue? or queries the current setting. 

6-84

:NUMeric:CBCycle:VALue?

Queries the numeric list data from Cycle by Cycle measurement. 

6-85

:NUMeric:FLICker?

Queries all settings related to output of numeric data from flicker 

measurement. 

6-85

:NUMeric:FLICker:COUNt?

Queries the number of the measurement within the specified observation 

period at which flicker measurement stops. 

6-85

6.1  List of Commands

Summary of Contents for WT3001E




















































































































































































Reviews:

No comments