A3-10
IM 34M06C91-01E
5th Edition : Dec. 25, 2013-00
(4) A
screen
prompting
for
the
manufacturer’s installation disk is
displayed. Click [Browse] and select
the “x:\Win2000” folder on the CD-
ROM. “x:\Win2000” is displayed in the
[Copy manufacturer’s files from:]
field. Click [OK].
(‘x’ denotes the drive letter (e.g. ‘d’) of
the CD drive containing the product
CD-ROM.)
(5) The Driver Files Search Results
screen is displayed. Verify that
“x:\win2000\ftdiport.inf” is displayed
on the screen and click [Next].
(‘x’ denotes the drive letter (e.g. ‘d’)
for the CD drive containing the
product CD-ROM.)
(6) Copying of the driver software begins.
When installation is completed, a
confirmation screen is displayed.
Click [Finish].
⇒
At this point, you have completed
installing the driver software. Proceed to
Section A3.7, “Verifying Installation in
Windows 2000/XP Environment”.
CAUTION
-
Configuring the FA-M3 and software to
use higher transmission rates will allow
smoother use.
For instance, you may select "115200
bps
even
parity"
in
the
WideField3/WideField2
environment
setup
and
ladder
program
configuration.
-
When you connect the product to the
PC, the “Found New Hardware Wizard”
will be started automatically twice.
Selecting file “ftdibus.inf” first installs it
automatically. Files “ftdibus.inf” and
“ftdiport.inf” are to be installed in this
order.
-
Until the above-mentioned two driver
software files have been installed, the
KM13-1S USB-Serial Converter device
cannot be recognized by the PC.
Step (5)
Step (6)
Step (4)
Summary of Contents for Vitesse FA-M3V
