YOKOGAWA vigilantplant EJXMVTool FSA120, User Manual, Page: 80 / 98

6-29
<Toc> <Ind> <6. Display Specification >
All Rights Reserved Copyright © 2006, Yokogawa Electric Corporation
IM 01C25R51-01E
NOTE
• After clicking the [Next] button, if a “The specified operating condition includes both gas
and liquid phases.” information message is displayed, the operating condition is near the
acceptable limits for liquid and gas.
F0629E.EPS
Figure 6.28 Warning message
• Please confirm the density value on the following page (fluid physical property setup
page) and continue configuration.
• If the temperature and pressure range input on the Fluid Operating Range Setup is too
wide, there is a probability of the calculation error of density is big.
• These ranges are used only for the density and viscosity calculation.
• Ranges of Transmitter are not changed.
(2) Gas or Steam (Category :Saturated steam)
F0630E.EPS
Figure 6.29 Fluid Operating Range Setup Screen (2)
Input operating range and select units
Pressure unit is selectable from kPa abs, bar abs, psi abs, kPa gauge, bar gauge, psi gauge
Atmospheric Pressure unit is selectable from: psi abs, bar abs, kPa abs
Input reference condition and select units
Pressure unit is selectable from kPa abs, bar abs, psi abs