YOKOGAWA vigilantplant EJXMVTool FSA120, User Manual, Page: 51 / 98

5-4
<Toc> <Ind> <5. Operation Specification for EJX910A Configuration>
All Rights Reserved Copyright © 2006, Yokogawa Electric Corporation
IM 01C25R51-01E
(D) Configure with existing Configuration File (import:XMV and PRM file,export:dfs file)
Applicable only for FSA210 user.
T0504E.EPS
Open Offline Parameter
window.
Online Parameter is
open
Import ->Import PRM
(HARTonly)
Flow Configuration
Mode
Primary Element and
Pipe setup
Fluid type setup
Fluid Operating
Range setup
Import ->Import XMV
Offline
Parameter
Flow
Configuration
Wizard
Parameter Device
Upload Transmitter Flow
parameters and Transmitter
General parameters.
Upload from
device
1)
Device
Specify the target Flow Config
file “XXXXXX.xmv”
Import User Flow parameters,
Transmitter Flow parameters.
“XXXXXX.prm” to be edited.
HART Transmitter General
parameters.(FSA210 user only)
Confirm User Flow parameters.
Fluid Physical
property setup
Apply Transmitter Flow
parameters to Offline Database
Apply
Download Transmitter Flow
parameters and Transmitter
General parameters.
Additional
functions
Device
If required, you can check th flow
coefficient. The value is saved in
a log file: “FlowCoeffLog”.
Download
to device
2)
Device
Obtain Flow
Coefficient Additional
functions
Device
FieldMate
Menu
DTM Works
Menu
Sub Menu Sub Menu Procedure Description
Goes offline
Save the XXXXXX.dfs
User Flow parameters,
Transmitter Flow parameters
and Transmitter General
parameters.
Disconnect
Save to
file…
Device
File
Upload
parameters
from the
device
1
2
3
5
4
Import existing
file and
cofirm/modify
flow
configuration
Download
parameters
Confirm
flow
coefficient
Save
parameters
to .dfs file
Step
Assign DTM
1) Before starting operation, execute ‘Upload from device’, so that the general parameters
of the transmitter in the offline database are synchronized with the device.
Upload data from the transmitter does not include User Flow Parameters.*
*: User Flow Parameters consist of primary device information, fluid information and
operating condition.
2) Executing ‘Download to device’ will write both Transmitter Flow Parameters and Transmit-
ter General Parameters into the device. Before executing ‘Download to device’, execute
‘Upload from device’, so as to make the general parameters of the transmitter in the
offline database synchronized with the device.
Download data to transmitter does not include User Flow Parameters.