YOKOGAWA STARDOM FCN-500, Engineering Manual

Page: 74 / 226

<4. Control Application Creation>
66
TI 34P02K35-02E Jun. 6, 2018-00
4.9 Control Application Backup
Daily backup of control applications is important to guard against damage or
replacement of he PC used for creating the control applications.
This section describes the procedure for application backup.
● Folder for Storing Logic Designer Applications
Applications created using Logic Designer are stored in the following folder on the
PC:
<Logic Designer’s installed path>\FCN-FCJ\LogicDesigner\Projects
If Logic Designer is installed in its default location, this folder corresponds to:
C:\YOKOGAWA\FCN-FCJ\LogicDesigner\Projects
Within this folder, application data is stored in a folder having the same name as the
Logic Designer project and a file named “<project name>.mwt”. Depending on the
size of an application, the folder named after the project may be several tens of
megabytes, making direct backup a little difficult.
In this case, compress the application into a zwt format file first and backup the
compressed zwt file. Typically, a folder several tens of megabytes can be
compressed into a zwt file below 1 megabyte.
● Procedure for Compressing a Project into zwt Format
1. Select [File]-[Zip and Save As] from Logic Designer’s menu bar.
2. On the displayed dialog, select “Zipped Project Files (*.zwt).”
3. When “Zipped Project Files (*.zwt)” is selected, the Zip Options checkboxes are
enabled for selection. Unless required for some reason, these options should
generally be left unticked. Click [Save].
4. A compressed “zwt” file will be created in the folder displayed in the dialog.
5. Save a backup copy of the compressed zwt file.